Mould Removal Application

Read and understand the Material Safely Data Sheet (MSDS) before use
Pre-test in an inconspicuous location before use.

Dilutions
Ready to use. Do not dilute.
Do not mix with any other cleaning solution.

Application

  1. Pre-cleaning and prior removal of organic load will enhance results.
  2. Apply Mould Remover using a sprayer or sponge.
  3. Agitate & allow 60 seconds (minimum) dwell time.
  4. Rinse surface using clean water.
  5. Repeat process for areas of high organic load. Additional dwell time & agitation may be required for stubborn mould staining.