Benefits

• Smart Cleaning Power – Fire Restore is specifically designed for fast and effective removal of soot residues from resilient surfaces where larger areas to be cleaned are often encountered. The affordable Fire Restore solution, with it’s incredible cleaning action, helps lower costs on these applications.
• Innovative Chemistry – Fire Restore has exceptional ability to penetrate and release in-grained soils and the micro-size smoke particles from porous and semi-porous surfaces.
• Safety First – Fire Restore is an alkaline detergent but is not classified as dangerous goods. This makes it substantially safer in use and in transport.
• Versatile Solution – Fire Restore is also provides powerful cleaning action on general grime and oils found on tiles, masonry and concrete.
• Odour Control – Fire Restore is the key to successful odour control in fire and soot affected areas. Effective removal of this soiling is an integral part of eliminating associated odours.

Application areas and surface suitability

Fire Fix is fire restoration cleaner for hard resilient surfaces.

Safe and ideal for use on all resilient surfaces including tiles, concrete, masonry, terracotta, natural stone and unsealed lino. Most painted concrete floors, powder coated metals, zincalume, construction timber and structural steel, can also be safely cleaned with AP987 Fire Restore, however pretesting for substrate chemical sensitivity is recommended. If sensitive substrates are encountered, try a weaker dilution of Fire Restore or use Actichem’s AP986 Fire Fix.

How to use

Always pretest in an inconspicuous location for fibre and dye sensitivity. Do not use on stain resistant carpets except in restoration situations.

Dilutions

• Add 50-100ml per litre of water (1:10 to 1:20) depending on soil conditions.
• For heavy soil conditions, up to 200ml per litre can be added. If used on sensitive surfaces, always pre-test for substrate chemical sensitivity

Addition of Oxyboost: (Odour control & stain removal)
Oxyboost is a concentrated oxygen oxidising powder which when added to the diluted Fire Restore solution, provides oxidation of mal-odour molecules and removal of stubborn stains.

1. Mix up Fire Restore solution using warm water (40 – 600C)
2. Add 10 – 20 grams Oxyboost per litre of ready-to-use Fire Restore solution. Stir well to dissolve Oxyboost.
3. Use solution within 30 minutes.

Application

1. Cover areas not being cleaned. Only apply solution to an area which can be cleaned and rinsed within 30-40 minutes. Follow typical fire restoration cleaning techniques.
2. Apply the solution to a workable area using a sprayer, sponge or scrubber machine. Do not allow solution to dry onto the surface.
3. Agitate and allow 10 to 15 minutes dwell time.
4. Re-agitate areas of heavy soiling
5. Rinse the surface thoroughly using clean water. A high pressure washing system will provide effective results.